Thursday, July 5, 2012

motor adapter

Step 6:  Install motor.  Here is the motor to transmission adapter.  There are tapped holes in the flange of a bearing.   The holes line up with the flywheel.  The bearing is pressed in to an aluminum spacer.  

The motor will bolt to this side and the shaft will engage the bearing with a key.

 I attached the flywheel,

and the clutch.


  1. hey chris:
    any chance you still have the CAD for the bellhousing adapter?
    looking to machine one up for a pending conversion
    many thanks
    graynak at gmail dot com

  2. Hi Geoff,
    I do not. It was all designed by